Crystal Varnish Set
Crystal Varnish Set
Crystal Varnish Set
Christal Glaze Varnish is ideal for adding a glazed ceramic look to a variety of hard craft surfaces.It has two companents A&B,they are mixed in equal quantities. The mixture should be used in 15-20 minutes. Because it is extra-thick, only one coat is needed for most surfaces.
• For other languages click here.
• See all colours below.
PRODUCT HIGHLIGHTS
TECHNICAL DATA
PRODUCT HIGHLIGHTS
- Bright
- Liquid consistency, Quick drying, Odorless
- Resin based
- Transparent
- Easy to implement
- Does not darken or fade
TECHNICAL DATA
- Since it is a two-component product, it should be mixed very well to obtain a homogeneous and transparent consistency.
- It should be mixed in a transparent jar.
- It is recommended to mix for 3 minutes with serial movements in one direction, not too fast.
- Leave for 1 minute, if air bubbles are formed, they should rise to the surface and the bubbles should be removed with a blowtorch.
- Apply with a hard-tipped brush with slow movements.
- It is applied densely but care should be taken not to flow.
- The bubbles formed are destroyed with a blowtorch.
- It is a varnish that gives a glazed effect on vertical surfaces.
- After varnish application, make sure that there is no dust in the environment.
Renk Kartelası


Ürün Hakında
Sürüldüğü objeyi sırlanmış görüntüsü veren, iki kompenantlı özel bir üründür. A ve B kompenantı aynı miktarda karıştırılır. Karıştırılan malzeme 15-20 dakika içerisinde kullanılmalıdır. Ekstra kalın olduğu için tek kat yeterlidir.
